aa
  English | 加入收藏 | 繁体中文
本站公告: 公司宗旨 热列祝贺湖北新辉船用机械有限公司网站开通!!!
电动单轨吊(平移吊)-船用起重机-产品展示-湖北新辉船用机械有限公司
新品展示
产品中心
船用起重机
机舱行车
液压舵机
锚机
绞盘
绞车
救生设备
舾装件
液压滑动式水密门
联系我们

联系人: 胡先生
电 话: 0714-6376580
传 真: 0714-6376580
手 机: 18672023939
邮 编: 435000
地 址: 湖北省黄石市团城山大畈路16号

产品展示
 船用起重机 >> 电动单轨吊(平移吊) >> 电动单轨吊(平移吊)
 
产品编号:
1517273465516
产品名称:
电动单轨吊(平移吊)
规  格:
2~13Ton
产品备注:
单轨吊、平移吊、食品吊
产品价格:
¥0
 
   产 品 说 明

技术参数
TECHNICAL PARAMETER
额定载荷
S.W.L.
2.0T
3.0T
4.0T
5.0T
7.0/1.5T
13.0/3T
其它规格OTHERS
起升速度
HOISTING SPEED
15m/min
10m/min
10m/min
10m/min
7/14m/min
5/10m/min
根据
用户
要求
设计
DESIGNED
BY USER'S
REQUIREMENT
行走速度
TRAVELLING SPEED
10 m/min
10 m/min
10 m/min
10 m/min
10 m/min
10 m/min
起升高度
HOISTING HEIGHT
20 m
20 m
25 m
30 m
30 m
30 m
超出舷边距离
LOVEREACH LENGTH
3.5m
4.5m
5m
5m
3.5m
5m
工作电制
POWER SUPPLY
AC380V 50HZ 3PH / AC415V 50HZ 3PH  / AC440V 60HZ 3PH
轨道长度
REALWAY LENGTH
根据用户要求决定  DECIDED BY USER
电机参数
MOTOR
PARAMETER
运行电机
TRAVELLING  MOTOR
YZ-112L-6-H
YZ-112L-6-H
YZ-112L-6-H
YZ-132S-6-H
YZ-132S-6-H
YZ132M1-4-H
2.5KW/1100RPM
2.5KW/1100RPM
2.5KW/1100RPM
4KW/1130RPM
4KW/1130RPM
6.3KW/1630RPM
IP56/F
IP56/F
IP56/F
IP56/F
IP56/F
IP56/F
绞车电机
HOISTING MOTOR
YZ-132M-6-H
YZ-160S-6-H
YZ-160L-6-H
YZ-160L-6-H
YZ-200L-4/8/16-H
YZ225S-4/8/16-H
6.3KW 1130RPM
8.5KW 1135RPM
13KW 1140RPM
13KW 1140RPM
14/14/6.5KW
1733/840/410r/min
19/19/9.1KW
1723/835/413r/min
IP56/F
IP56/F
IP56/F
IP56/F
1733/840/410r/min
IP56/F

    本吊机为平移式、带有两台起升装置的单梁船用起重设备,安装在船舶的尾部.主要用于吊装船员供应品及船用设备,也能用于吊装机舱部件如柱塞、缸套等.
    本机采用平移梁式结构,起升机构装在移动梁上,移动梁可在轨道梁上移动。轨道梁采用焊接型式箱形结构。移动梁为本机主要部件,也采用箱形结构,其上装有起升机构(两台),行走机构、电缆卷筒、停车锁定装置、电器控制箱等。行走机构输出齿轮与齿条啮合传动,可使移动梁沿着轨道梁运动,并具有自锁定位能力。当船舶摇摆横倾不超过5°、纵倾不超过2时,本吊机能正常工作,在停止使用时能通过停车锁定装置可靠定位,不产生滑移。停车锁定装置使用时,本机所有动作全部失效,停车锁定装置解除后,本机才会正常工作,整体结构安全可靠。
    本机驱动型式有电动型和液压型,具体可按用户要求设计。
    This crane is a marine telescopic mono-rail lifting appliance with two sets of electric rope hoisting winch, intended for using on stern on board. It's mainly used for lifting supplies such as foods, vegetables and fruits etc, and also for lifting component parts in the E\R such as piston and cylinder sleeve etc.
    This crane adopts translation beam type structure, the marine el. rope hoisting winch is installed on the translation beam, the translation beam is installed on the mono-rail box-beam and walk. Class of protection of all electric motor and electric appliance are IP56. The crane mainly consists of box-beam, translation beam, el. rope hoisting winch, traversing mechanism, cable reel and el. control box etc. The realway beam adopts box-beam, under which low flange plate is provided, and also with rack. Its top flange plate connects to ship hull. Its total length and the connecting points with ship hull are decided as per the arrangement of ship hull. The translation beam is a main part, adopt box-type beam construction, on which electric rope hoisting winch (two sets), traversing mechanism, cable reel and el. control box etc. are installed. While the shipboard heeled not more than 5° and trimed not more than 2, the traversing mechanism can normally work, it can position reliably once stopping and no slipping happen.
    The actual specification can be designed on customers' requirements.
点击数:2449  录入时间:2010/1/5 【打印此页】 【关闭
   业务咨询
   技术咨询
 
  贵宾留言


 版权所有:湖北新辉船用机械有限公司  http://www.hbswmm.com | 备案号:鄂ICP0831243

 地址:湖北省黄石市团城山经济开发区 电话:+86-0714-6376580  传真:+86-0714-6376580 电邮:dfgyl@163.com